ET10061040 REV. 0  0334B5555 BLACK AC ADAPTER 55V DC 1A POWER SUPPLY 100-240V AC ~ 50/60Hz 1.5A

General:
■AC Input Voltage: 90-264VAC, 47-63Hz
■Conducted Immunity: EN61000-4-6, 0.15-800MHz, 10V, 80% AM
■Cooling: Convection
■Efficiency: 85% Minimum
■EFT / Bursts: EN61000-4-4, ±2KV
■Electrostatic Discharge: EN61000-4-2, ±4KV Contact / ±8KV Air
■EN55022: Class B Rated
■ETSI: EN 301 489-1, V1.4.1 (2002-08) EN301489-4 V1.3.1 (2002-08), EN301-489-17 V1.2.1 (2008-08)
■Fluctuations & Flicker: EN61000-3-3
■Harmonics: EN61000-3-2 Level A
■Hold-up time: > 10msec (Full Load & 100 VAC)
■Humidity: <95% Non-Condensing
■Input connector: IEC-320 C14 (3-Pring)
■Inrush Current: <50A @ 250 VAC (Cold Start)
■Operation Temperature: -5 ~ 45C Full Load
■Over Current protection: 115-150% (auto-recovery)
■Over-voltage Protection: 110-125% (recycle AC to reset)
■Radiated Susceptibility: EN61000-4-3, 26-1000MHz, 10V/M, 80% AM
■REGULATION: ± 2% max Line & Load
■Ripple @ Noise (V1): 1% pk-pk max (20MHz)
■Short circuit protection: Continuous
■Storage Temperature: -40 ~ 85C
■Surges: EN61000-4-5, ±2KV Line-Earth, ±1KV Line-Line
■Voltage Dips: EN61000-4-11, 95% Dip & 10ms, 30% Dip & 500ms
■Voltage Interruptions: EN61000-4-11, 95% Reduction, 5s

The Indoor POE Series are Power-over-Ethernet (PoE) power supplies with integral DC Injector. They provide 1 Amp of 48V or 55V DC power f10/100 Base-T transformers for connection to an IEEE 802.3 (10/100 Base-T) compatible device. An output RJ45 connector provides the 10/100 Base-T data and 55V or other voltages for connection to the wireless modem. These supplies feature an impact resistant polycarbonate enclosure with a 3-prong IEC-320 C14 inlet.

Weight:  293 grams
Dimension: 16 x  6 x  3.5 cm

To use with: Aironet 1400 series



Information's are here for your reference only and accuracy can not be guaranteed

Copyright © 2012 All rights reserved