PMP130-12-Q14 AC Adapter 12vdc 11A 8Pin 13mm Din 130W Desktop Power Supply

Condition: New - working

Content : One Adapter only

Model: PMP130-12-Q14  

 AC Input: 100 - 120VAC / 200-240V ~ 3.4A Max 47-63Hz 130 Watts
Output: 12vd === 11.0A
Pin1,2,4,6 = Return
Pin3,5,7,8 = 12vdc

Same as IPS PMP130-12-Q14 AC Adapter 12vdc 11A 130W 8Pins 13mm Din Equipment Power Supply
International Power source

INPUT
Voltage 90-132VAC or 180-264VAC (auto-ranging).
Frequency 47-63Hz.
Input current 3.0A (rms) @ 115VAC.
1.7A (rms) @ 230VAC.
Earth leakage current 90uA max @ 115VAC, 60Hz.
150uA max @ 230VAC, 50Hz.
Inrush current 15A @ 115VAC or 30A @ 230VAC at 25 °C
and cold start.
Withstand voltage 4000VAC from input to output.
1500VAC from input to ground.
500VAC from output to ground.
OUTPUT
Power 130W max.
Voltage/current See table.
Ripple and noise 1% p-p max.
Over voltage protection Provided on output: set at 112-132% of its
nominal output voltage.
Over current protection All outputs protected to short circuit
conditions.
Temperature coefficient 0.04%/ °C all outputs.
Transient response Max excursion of 4% or better on all models,
recovering to 1% of final value within 500us
after a 25% step load change.
Line regulation ±0.5% max at full load.
ENVIRONMENTAL
Operating temperature 0 °C to 70 °C.
Storage temperature €“40 °C to 85 °C.
Humidity 5-95% non-condensing.
Derating Derate from 100% at 50 °C linearly to 50%
at 70 °C.
w w w. p o w e r b o x . i n f o
Switchbox PMP130 Series
1 0 0 - 1 3 0 W S I N G L E O U T P U T M E D I C A L A D A P T E R
GENERAL
Switching frequency 68KHz ±8KHz.
Efficiency 70% min on Vo >12V, 65% min on the
others.
Hold up time 10mS min at 110VAC.
MTBF 400,000 hours min at full load at 25 °C
ambient, calculated per MIL-HDBK-217F.
Dimensions See drawing.
Weight 800g.
STANDARDS
Safety standards UL2601-1, CSA C22.2 No 601.1,
TUV EN60601-1.
EMC performance EN55011 Class B conducted, Class B radiated.
FCC Class B conducted, Class B radiated.
VCCI Class B conducted, Class B radiated.
EN61000-3-2 Harmonic distortion Class A.
EN61000-3-3 Line flicker.
EN61000-4-2 ESD, ±8KV air and ±6KV contact.
EN61000-4-3 Radiated immunity, 3V/m, 80-2500MHz.
EN61000-4-4 Fast transient/burst, ±2KV.
EN61000-4-5 Surge, ±1KV diff., ±2KV com.
EN61000-4-6 Conducted immunity, 3Vrms.
EN6100-4-8 Magnetic field immunity, 3A/m.
EN61000-4-11 Voltage dips, 30% reduction
for 500ms, 60% reduction for 100ms and
>95% reduction for 10ms.
20080515

To use with: Medical Equipments

More info